265/70R16 vs 265/70R17 Side-by-side tire size comparison with specs and compatibility

265/70R16⌀ 777mm265/70R17⌀ 803mm+12.7mm
Compatibility
+3.27% diameter difference
⚠ Swap with Caution

This tire swap is between 3-5% diameter difference. Check for fender clearance and be aware of speedometer error. May require recalibration.

Full Specifications Comparison

Specification 265/70R16 265/70R17 Difference
Overall Diameter 777.4 mm (30.6") 802.8 mm (31.6") +25.4 mm
Section Width 265 mm (10.4") 265 mm (10.4") 0 mm
Sidewall Height 185.5 mm 185.5 mm 0 mm
Circumference 2442.3 mm 2522.1 mm +79.8 mm
Revolutions/Mile 659 638 -21
Aspect Ratio 70% 70% 0%
Rim Diameter 16" 17" +1"

Key Impact Summary

Ground Clearance
+12.7 mm
Speedometer Error
+3.27%
Width Change
0 mm
Sidewall Change
0 mm

Speedometer Correction Table

When switching from 265/70R16 to 265/70R17, your speedometer will under-read. Here is the correction at common speeds:

Speedometer Shows Actual Speed (mph) Difference
30 mph 31 mph +1 mph
40 mph 41.3 mph +1.3 mph
50 mph 51.6 mph +1.6 mph
60 mph 62 mph +2 mph
70 mph 72.3 mph +2.3 mph
80 mph 82.6 mph +2.6 mph
90 mph 92.9 mph +2.9 mph
100 mph 103.3 mph +3.3 mph
110 mph 113.6 mph +3.6 mph
120 mph 123.9 mph +3.9 mph

What This Swap Means

Ground clearance: Increases by 12.7mm, providing slightly better approach angles for off-road driving and speed bump clearance.

Vehicles Using 265/70R16

Vehicles Using 265/70R17

Related Comparisons

Individual Tire Specs

Frequently Asked Questions

This swap requires caution. The diameter difference is +3.27% (+25.4mm). This exceeds the recommended 3% threshold and may affect speedometer accuracy, ABS calibration, and could cause clearance issues.
Switching from 265/70R16 to 265/70R17 creates a +3.27% speedometer error. Your actual speed will be faster than displayed — at an indicated 60 mph, you'll actually be going 62.0 mph.
Switching from 265/70R16 to 265/70R17 changes ground clearance by +12.7mm. The vehicle will sit 12.7mm higher. Ground clearance change equals half the overall diameter difference.