2020 Toyota Tundra Tire Size Factory tire sizes, bolt pattern & tire pressure
Tire Sizes
275/65R18, 275/55R20
Bolt Pattern
5x150
Offset
0-25
Tire Pressure
35/35 PSI
Tire Sizes by Trim
Tire Specifications for 2020 Toyota Tundra
Overall Diameter
814.7 mm
32.1"
Section Width
275 mm
10.8"
Sidewall Height
178.8 mm
Circumference
2559.5 mm
Revs/Mile
629
Rim Diameter
18"
Alternative Tire Sizes
These sizes are within 3% diameter of the factory 275/65R18 and may fit the 2020 Toyota Tundra.
Related Comparisons
275/55R20 vs 285/55R20 Large SUV width upgrade 275/55R20 vs 275/60R20 Taller sidewall same width 275/65R18 vs 285/65R18 Truck tire width comparison 275/65R18 vs 275/70R18 Taller sidewall truck upgrade 255/70R18 vs 275/65R18 Wider but shorter profile 265/60R18 vs 275/65R18 Truck wider and taller 265/65R17 vs 275/65R18 Truck rim upgrade wider tire 245/50R20 vs 275/55R20 Large crossover upgrade 255/55R19 vs 275/55R20 Luxury SUV rim upgrade 255/65R18 vs 275/65R18 SUV width upgrade 275/55R20 vs 265/60R18 Rim downsize comparison 265/50R20 vs 275/55R20 Taller sidewall larger width 275/60R20 vs 275/55R20 Profile height comparison 255/60R19 vs 275/55R20 SUV plus-one wider 275/70R17 vs 275/65R18 Truck rim upgrade same width
Other Toyota Tundra Years
About 2020 Toyota Tundra Tires
The 2020 Toyota Tundra uses different tire sizes depending on trim. The bolt pattern is 5x150 with a center bore of 110.1mm, and the recommended offset range is 0-25mm.
Factory recommended tire pressure is 35 PSI (front) and 35 PSI (rear). Always check the tire pressure when tires are cold for the most accurate reading. The tire pressure placard is located on the driver's door jamb.
If you're looking to change tire sizes, the alternatives listed above are within 3% of the factory diameter and should be compatible without modifications. Always verify fender clearance before installing larger tires.