2025 Infiniti QX80 Tire Size Factory tire sizes, bolt pattern & tire pressure

Tire Sizes

275/55R20, 285/45R22

Bolt Pattern

6x139.7

Offset

25-35

Tire Pressure

35/35 PSI

Tire Sizes by Trim

Trim	Tire Size	Bolt Pattern	Pressure (F/R)
Sensory	275/55R20	6x139.7	35/35 PSI
Autograph	285/45R22	6x139.7	35/35 PSI

Tire Specifications for 2025 Infiniti QX80

Overall Diameter

810.5 mm

31.9"

Section Width

275 mm

10.8"

Sidewall Height

151.3 mm

Circumference

2546.3 mm

Revs/Mile

632

Rim Diameter

20"

View full 275/55R20 specifications & alternatives →

Alternative Tire Sizes

These sizes are within 3% diameter of the factory 275/55R20 and may fit the 2025 Infiniti QX80.

205/80R19 Safe 0.0% diff 315/40R22 Safe 0.0% diff 185/75R21 Safe 0.1% diff 295/60R18 Safe 0.1% diff 235/75R18 Safe 0.1% diff 335/45R20 Safe 0.1% diff 235/70R19 Safe 0.1% diff 345/40R21 Safe 0.1% diff

Related Comparisons

275/55R20 vs 285/55R20 Large SUV width upgrade 275/55R20 vs 275/60R20 Taller sidewall same width 245/50R20 vs 275/55R20 Large crossover upgrade 255/55R19 vs 275/55R20 Luxury SUV rim upgrade 275/55R20 vs 265/60R18 Rim downsize comparison 265/50R20 vs 275/55R20 Taller sidewall larger width 275/60R20 vs 275/55R20 Profile height comparison 255/60R19 vs 275/55R20 SUV plus-one wider 285/45R22 vs 305/40R22 Large rim truck upgrade

Other Infiniti QX80 Years

2024 Infiniti QX80 275/60R20, 275/50R22 2023 Infiniti QX80 275/60R20, 275/50R22 2022 Infiniti QX80 275/60R20, 275/50R22 2021 Infiniti QX80 275/60R20, 275/50R22 2020 Infiniti QX80 275/60R20, 275/50R22

About 2025 Infiniti QX80 Tires

The 2025 Infiniti QX80 uses different tire sizes depending on trim. The bolt pattern is 6x139.7 with a center bore of 78.1mm, and the recommended offset range is 25-35mm.

Factory recommended tire pressure is 35 PSI (front) and 35 PSI (rear). Always check the tire pressure when tires are cold for the most accurate reading. The tire pressure placard is located on the driver's door jamb.

If you're looking to change tire sizes, the alternatives listed above are within 3% of the factory diameter and should be compatible without modifications. Always verify fender clearance before installing larger tires.