2025 Dodge Charger Tire Size Factory tire sizes, bolt pattern & tire pressure

Tire Sizes

245/45R18, 245/40R20

Bolt Pattern

5x115

Offset

18-28

Tire Pressure

36/36 PSI

Tire Sizes by Trim

Trim	Tire Size	Bolt Pattern	Pressure (F/R)
Sixpack	245/45R18	5x115	36/36 PSI
Sixpack S	245/40R20	5x115	36/36 PSI
R/T	245/40R20	5x115	36/36 PSI

Tire Specifications for 2025 Dodge Charger

Overall Diameter

677.7 mm

26.7"

Section Width

245 mm

9.6"

Sidewall Height

110.3 mm

Circumference

2129.1 mm

Revs/Mile

756

Rim Diameter

18"

View full 245/45R18 specifications & alternatives →

Alternative Tire Sizes

These sizes are within 3% diameter of the factory 245/45R18 and may fit the 2025 Dodge Charger.

315/35R18 Safe 0.0% diff 205/60R17 Safe 0.0% diff 195/50R19 Safe 0.0% diff 325/30R19 Safe 0.0% diff 275/40R18 Safe 0.1% diff 155/55R20 Safe 0.1% diff 175/70R17 Safe 0.1% diff 245/50R17 Safe 0.1% diff

Related Comparisons

245/45R18 vs 255/45R18 Performance width upgrade 245/45R18 vs 255/40R19 Plus-one sport upgrade 235/50R18 vs 245/45R18 Wider with lower profile 245/40R18 vs 245/45R18 Profile height comparison 245/45R18 vs 235/45R18 Width comparison on 18-inch 245/40R20 vs 255/40R20 Width upgrade 20-inch

Other Dodge Charger Years

2024 Dodge Charger 215/65R17, 235/55R19, 245/45R20 2023 Dodge Charger 215/65R17, 235/55R19, 245/45R20, 275/40R20 2022 Dodge Charger 215/65R17, 235/55R19, 245/45R20, 275/40R20 2021 Dodge Charger 215/65R17, 235/55R19, 245/45R20, 275/40R20 2020 Dodge Charger 215/65R17, 235/55R19, 245/45R20, 275/40R20

About 2025 Dodge Charger Tires

The 2025 Dodge Charger uses different tire sizes depending on trim. The bolt pattern is 5x115 with a center bore of 71.5mm, and the recommended offset range is 18-28mm.

Factory recommended tire pressure is 36 PSI (front) and 36 PSI (rear). Always check the tire pressure when tires are cold for the most accurate reading. The tire pressure placard is located on the driver's door jamb.

If you're looking to change tire sizes, the alternatives listed above are within 3% of the factory diameter and should be compatible without modifications. Always verify fender clearance before installing larger tires.