2021 Audi Q5 Tire Size Factory tire sizes, bolt pattern & tire pressure

Tire Sizes

235/60R18, 255/45R20

Bolt Pattern

5x112

Offset

30-40

Tire Pressure

35/35 PSI

Tire Sizes by Trim

Trim	Tire Size	Bolt Pattern	Pressure (F/R)
Premium 45 TFSI quattro	235/60R18	5x112	35/35 PSI
Prestige 45 TFSI quattro	255/45R20	5x112	35/35 PSI

Tire Specifications for 2021 Audi Q5

Overall Diameter

739.2 mm

29.1"

Section Width

235 mm

9.3"

Sidewall Height

141 mm

Circumference

2322.3 mm

Revs/Mile

693

Rim Diameter

18"

View full 235/60R18 specifications & alternatives →

Alternative Tire Sizes

These sizes are within 3% diameter of the factory 235/60R18 and may fit the 2021 Audi Q5.

205/75R17 Safe 0.0% diff 285/45R19 Safe 0.0% diff 165/70R20 Safe 0.0% diff 195/85R16 Safe 0.2% diff 255/65R16 Safe 0.2% diff 155/75R20 Safe 0.2% diff 255/60R17 Safe 0.2% diff 215/60R19 Safe 0.2% diff

Related Comparisons

225/65R17 vs 235/60R18 SUV plus-one rim upgrade 235/60R18 vs 245/60R18 SUV width upgrade on 18s 235/60R18 vs 235/55R19 Plus-one same width 235/60R18 vs 255/55R19 SUV width and rim upgrade 255/45R20 vs 265/45R20 Performance SUV width upgrade 255/45R20 vs 275/40R21 Performance SUV plus-one 215/65R17 vs 235/60R18 Compact SUV plus-one wider 225/60R18 vs 235/60R18 SUV width upgrade on 18s 235/65R17 vs 235/60R18 SUV plus-one same width

Other Audi Q5 Years

2025 Audi Q5 235/60R18, 235/55R19, 255/45R20 2024 Audi Q5 235/60R18, 235/55R19, 255/45R20 2023 Audi Q5 235/60R18, 235/55R19 2022 Audi Q5 235/60R18, 235/55R19 2020 Audi Q5 235/60R18, 255/45R20

About 2021 Audi Q5 Tires

The 2021 Audi Q5 uses different tire sizes depending on trim. The bolt pattern is 5x112 with a center bore of 66.6mm, and the recommended offset range is 30-40mm.

Factory recommended tire pressure is 35 PSI (front) and 35 PSI (rear). Always check the tire pressure when tires are cold for the most accurate reading. The tire pressure placard is located on the driver's door jamb.

If you're looking to change tire sizes, the alternatives listed above are within 3% of the factory diameter and should be compatible without modifications. Always verify fender clearance before installing larger tires.